Electroválvula ST-SB 1/4'' NO latón FKM 0-10bar 12V CC
4.9 (100) · € 25.99 · En stock
Comprar una válvula de solenoide ST-SB 1/4'' NO latón FKM 0-10bar 12V DC en línea de Tameson hoy. Envío el mismo Día con opciones de envío global.
Válvula solenoide de 2 vías JP Fluid Control (tipo ST-SB) con roscas G 1/4 pulgadas y una bobina de 12 V CC. La función de circuito de la electroválvula es normalmente abierta (tensión = cierre) y de funcionamiento semidirecto, por lo que no se requiere diferencial de presión. Adecuado para una temperatura máxima del medio de 120° C (248 ° F) y un rango de presión de 0 - 10 bar (0 - 145 psi). Cuerpo de latón con junta de FKM (FPM) y orificio de 10,5 mm. El valor Kv es de 1,25 m3/h (20,84 l/min a dp=1 bar de agua).
Solenoid Valve ST-SB 1/4'' NO brass FKM 0-10bar 12V DC
JP Fluid Control 2 way solenoid valve (type ST-SB) with G 1/4 inch threads and a 12 V DC coil. The circuit function of the solenoid valve is normally
Solenoid Valve ST-SB 1/4'' NO stainless steel FKM 0-10bar 12V DC
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4 inch) female threaded (NPT) connections, and heat and oil resistant Viton seals. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water.
U.S. Solid 1/4 inch NPT Brass Electric Solenoid Valve DC 12V Viton Direct Normally Closed
Automatic Transmission AT Kickdown Solenoid Valve Body Module Auto Transmission valve body with solenoids for Aud-i VW Jetta Golf Passat Touran Sharan
1-1/4'' inch 12V DC Electric Brass Solenoid Valve 12-Volts
Tarifa de Precios - Control y Regulación - Calor - Salvador Escoda SA
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4 inch) female threaded (NPT) connections, and heat and oil resistant Viton seals. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water.
U.S. Solid 1/4 inch NPT Brass Electric Solenoid Valve DC 12V Viton Direct Normally Closed
JP Fluid Control 2 way solenoid valve (type ST-SA) with G 1/2 inch threads and a 12 V DC coil. The circuit function of the solenoid valve is normally closed (voltage = open) and semi-direct operating, so no pressure differential is required. Suitable for max media temperature of 130° C (266 ° F) pressure range of 0 - 10 bar (0 - 145 psi). Housing of brass with EPDM sealing and a 10.5 mm orifice. The Kv-value is 1.49 m3/h (24.84 l/min at dp=1 bar water).
Solenoid Valve - G 1/2 inch - 12 V DC - Normally Closed - Brass - FKM - 10.5 mm Valve Bore - 10 Bar
Solenoid Valve ST-SB 1/4'' No Brass FKM 0-10bar 12V DC
Solenoid Valve ST-SB 1/4'' No Brass FKM 0-10bar 12V DC
Catálogo Master Micro Automación 2020, PDF, Automatización
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects. 1/4 Brass direct acting with NBR gasket.
U.S. Solid 1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open (Air, Water.)
